Airaid 200-240 Manuel d'utilisateur télécharger pdf

Installation Instructions

For Part Numbers:

200-240 700-422 Airaid Oiled Media Filter

201-240 701-422 SynthaMax Dry Media Filter - Red

202-240 702-422 SynthaMax Dry Media Filter - Black

203-240 703-422 SynthaMax Dry Media Filter - Blue

This Is Not A Complete Kit

This Is A Retro Fit Kit

To Be Used Only With Airaid Part # 200-102

1999-00 Cadillac Escalade

1996-99 Chevrolet/GMC Pickup C/K 1500

1996-00 Chevrolet/GMC Pickup C/K 2500, C/K 3500

1996-99 Chevrolet/GMC Suburban C/K 1500, C/K 2500

1996-00 Chevrolet Tahoe/GMC Yukon

4.3L V6, 5.0L V8, 5.7L V8

Component Identification

1. Airaid Premium Filter 1

2. MAF Panel 1

3. Bottom Panel 1

4. End Panel 1

5. Weather Strip 25 1/4” 1

6. 1/4” Flat Washer 1

7. #6 Flat Washer 9

8. 6-32 x 5/16” Phillips Screw 9

9. 6-32 Keps Nut 9

10. 5/16-18 x 1” Hex Bolt 2

11. 5/16” Flat Washer 2

12. 5/16” Nylock Nut 2

13. 1/4-20 x 1/2” Hex Bolt 1

14. 1/4-20 Serrated Nut 1

15. Rubber Trim 12 1/2” 1

1. Disconnect the negative battery cable.

VERY CAREFULLY! Remove the air intake tem-

perature sensor first, and then the grommet from the air

intake tube and set them aside. There is no need to dis-

connect the wiring harness on the temp sensor.

Loosen the two hose clamps on the stainless steel cou-

pler that connects the air intake tube to the Mass Air

Flow (MAF) sensor .

Loosen the hose clamp on the air filter and remove it

from the vehicle.

3. Assemble the three Cold Air Dam (CAD) panels (#s

2, 3, &4) as shown using nine 6-32 screws (#8), nine #6

washers (#7), and nine nuts (#9).

4. Install the supplied rubber trim (#15) into the hole in

the MAF Panel (#2) as shown.

5. Insert the air intake tube that was removed in step #1

thru the hole in the MAF panel and then rotate it clock-

wise so that the holes in the bracket on the tube line up

with the two holes in the bottom panel.

6. Install the stainless steel coupler removed in step #1

onto the air intake tube and tighten only the hose clamp

on the tube.

Mass Air Flow sensor

Rubber Trim

Temperature Sensor

2. Remove the two nuts and washers from the bolts that

secure the air intake tube to the inner fender. Save the 3”

x 2” plate from the bottom of the fender for reinstalla-

tion in step #7. Remove the intake tube from the vehicle.

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Résumé du contenu

Page 1 - Installation Instructions

Installation Instructions For Part Numbers: 200-240 700-422 Airaid Oiled Media Filter 201-240 701-422 SynthaMax Dry Media Filter - Red 202-240

Page 2 - Tune-Up Kit!

10. Double check your work! Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, nuts, connectors, and screw

Modèles reliés 201-240 | 202-240 | 203-240 |

Commentaires sur ces manuels

Pas de commentaire

Airaid 200-240 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement aérien Airaid 200-240. Airaid 200-240 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés 201-240 | 202-240 | 203-240 |

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement aérien Airaid 200-240