Airaid 200-280 Manuel d'utilisateur télécharger pdf

Component Identification

1. Airaid Premium Filter 1

2. Airaid Intake Tube 1

3. Cold Air Box 1

4. Filter Adapter 1

5. Urethane Hump Hose 1

6. Coupler w/ #68 Hose Clamp 1

7. 3/8”x 8” Breather Hose 1

8. Weather Strip 25” 1

9. 8-32 x 1/2” Button Head Screw 2

10. 1/4-20 x 1/2” Button Head Screw 3

11. 1/4-20 x 3/4” Button Head Bolt 1

12. ¼” Flat Washer 3

13. #64 Hose Clamp 2

14. 1/4 NPT x 3/8 Barbed Fitting 1

15. Edge Clip Cable Tie 1

Installation Instructions

For Part Numbers:

200-280 720-472 Airaid Oiled Media Filter

201-280 721-472 SynthaMax Dry Media Filter - Red

202-280 722-472 SynthaMax Dry Media Filter - Black

203-280 723-472 SynthaMax Dry Media Filter - Blue

2011-15 Chevrolet Silverado 2500HD/3500HD

2011-13 Chevrolet Suburban 2500

2011-15 GMC Sierra 2500HD/3500HD

2011-13 GMC Yukon XL 2500

6.0L V8 *With Mechanical Cooling Fan*

1. Disconnect the negative battery cable.

Remove the engine cover by simply pulling up on it and

sliding out from the vehicle.

2. Pull the PCV breather line from the factory intake

tube.

3.A.) Loosen the clamps securing the factory intake tube

to the throttlebody and the airbox.

B.) Separate the hose anchor from the factory intake and

remove the factory tube.

4. Remove the plastic PCV breather line from the facto-

ry hard line. A standard screwdriver works well for de-

pressing the locking tab in the coupling.

5. Disconnect the Mass Air Flow or MAF sensor ( A )

and the Manifold Absolute Pressure or MAP sensor

( B )Remove the factory airbox from the vehicle.

The airbox is secured to the vehicle with grommets and

simply lifts out.

6. Remove the four tray bolts and the airbox mounting

tray. Three of the bolts will be reused in step 9.

7. Secure the wiring harness to the inner fender as

shown using the Edge Clip Cable Tie (#15).

8. Install the Filter Adapter (#4) onto the Cold Air Box

or CAB (#3) as shown using the three 1/4-20 Button

Head Screws (#10) and 1/4” Flat Washers (#12).

A.) Transfer the MAF sensor from the factory airbox

into the Filter Adapter. Secure the sensor using the two

8-32 Button Head Screws (#9).

B.) Transfer the MAP sensor from the airbox into the

Filter Adapter and secure using the 1/4-20 x 3/4” Button

Head Bolt (#11).

Do Not Use Factory Hardware.

A.) MAF

B.) MAP

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

4. On 2015 Models: Remove the two 6mm bolts in the

fender brace and set the bolts and brace to the side.

1 2

Résumé du contenu

Page 1 - Installation Instructions

Component Identification 1. Airaid Premium Filter 1 2. Airaid Intake Tube 1 3. Cold Air Box

Page 2 - Tune-Up Kit!

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com REV.05.27.14 P/N 790-551 Aerosol Spr

Modèles reliés 201-280 | 202-280 | 203-280 |

Commentaires sur ces manuels

Pas de commentaire

Airaid 200-280 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement aérien Airaid 200-280. Airaid 200-280 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés 201-280 | 202-280 | 203-280 |

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement aérien Airaid 200-280