Airaid 200-251 Manuel d'utilisateur télécharger pdf

Component Identification

1. Airaid Premium Filter 1

2. Airaid Intake Tube 1

3. Cool Air Box 1

4. Air Filter Adapter 1

5. Silicone Hump Hose 1

6. Silicone Coupler 1

7. Weather Strip 25” 1

8. ¼-20 x ½” Button Head Bolt 3

9. 1/4-20x 3/4” Hex Bolt 1

10. 1/4” Nylock Nut 1

11. ¼” Flat Washer 8

12. M6-1x25 Hex Bolt 3

13. #60 Hose Clamp 2

14. #64 Hose Clamp 2

15. Bracket 1

Installation Instructions

For Part Numbers:

200-251 720-472 Airaid Oiled Media Filter

201-251 721-472 SynthaMax Dry Media Filter - Red

202-251 722-472 SynthaMax Dry Media Filter - Black

203-251 723-472 SynthaMax Dry Media Filter - Blue

2006 Chevrolet Silverado 1500

2007 Chevrolet Silverado Classic

1500/1500HD/2500HD/3500

4.8L V8, 5.3L V8, 6.0L V8

With Electric Cooling Fan & High Profile Hood

1. Disconnect the negative battery cable.

Loosen the bolt that secures the beauty cover to the en-

gine and remove it and the cover from the vehicle.

Loosen the hose clamp that secures the factory air intake

tube to the throttlebody.

2. Loosen two hose clamps. One on each side of the

Mass Air Flow (MAF) sensor .

Using a flat blade screwdriver, disconnect the factory

intake tube from the plastic clamp on the radiator hose

by prying them apart.

3. Remove the factory intake tube from the vehicle.

Next, remove the MAF sensor and coupler from the fac-

tory airbox and set them out of the way without discon-

necting the wiring harness.

4. Rock the factory air box back and forth and then lift

straight up remove it from the vehicle. There are only

grommets holding it in place, no bolts.

5. Using a 10mm socket, remove the bolts that secure

the factory air filter housing platform and remove it

from the vehicle.

6. Install the filter adapter (#4) into the Cool Air Box

(#3) as shown using three 1/4” Button head bolts (#8)

and three 1/4” flat washers (#11). Next, fasten the brack-

et (#15) to the front of the CAB as shown using one 1/4-

20 hex bolt (#9) two flat washers (#10), and one 1/4”

Nylock nut. Refer to the drawing above for reference.

7. Remove the factory bolt that secures the right front

fender to the radiator support. It will be reused in step

#8.

8. Install the CAB assembly into the vehicle where the

factory airbox used to be using three 6mm hex bolts

(#12) and three flat washers (#11) thru the bottom. Now

reinstall the factory fender bolt thru the bracket and into

the fender. Adjust the assembly for fit and tighten all

bolts and nuts at this time.

9. Reinstall the MAF sensor and coupler onto the filter

adapter and tighten the clamp.

Next install the hump hose (#5) onto the MAF using two

#60 hose clamps (#13). Leave these two clamps loose

for now.

MAF Sensor

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Résumé du contenu

Page 1 - Installation Instructions

Component Identification 1. Airaid Premium Filter 1 2. Airaid Intake Tube 1 3. Cool Air Box 1 4. Ai

Page 2 - Tune-Up Kit!

13. Double check your work! Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, and screws are tight. Doubl

Modèles reliés 201-251 | 202-251 | 203-251 |

Commentaires sur ces manuels

Pas de commentaire

Airaid 200-251 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement aérien Airaid 200-251. Airaid 200-251 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés 201-251 | 202-251 | 203-251 |

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement aérien Airaid 200-251