Airaid 400-729 Manuel d'utilisateur Page 2

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 1
10. Double check your work!
Make sure there is no foreign material in the intake path. Make
sure all clamps, hoses, bolts, and screws are tight.
11. Reconnect the negative battery cable!
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com
REV.12.2.13
P/N 790-551 Aerosol Spray
P/N 790-550 Squeeze Spray
7. Install the Airaid Modular Intake Tube (#2)
into the factory airbox. It will “snap” into
place.
8. Install the L-bracket (#3) over the factory
stud re-using the nut removed in step #1. Next
install the button head bolt (#4) and washer
(#5) thru the L-bracket, and into the tube.
Leave loose until final adjustments have been
made.
9. Due to inconsistent factory tolerances, some
minor adjustment may be necessary to the fac-
tory A/C line so it will clear the Airaid MIT
near the radiator support.. When all adjust-
ments have been completed, tighten the nut,
and button head bolt at the L-bracket.
For your Oiled media filter we
suggest using the AIRAID Filter
Tune-Up Kit!
Thank you for purchasing the Airaid Intake System. Contact Airaid @ (800) 498-6951 8:00 AM - 5:00 PM MST week-
days for questions regarding fit or instructions that are not clear to you. Your Airaid Intake System was carefully inspected and
packaged. Check that no parts are missing, or were damaged during shipping. If any parts are missing, contact Airaid. The air
filter element is protected from direct exposure to water and debris; care should be taken not to drive through deep water. WA-
TER INGESTION IS THE DRIVERS RESPONSIBILITY! The air filter is reusable and should be cleaned periodically.
FILTER IDENTIFICATION
850-349 Airaid Oiled Media 851-349 Airaid SynthaMax Dry Media - Red
852-349 Airaid SynthaMax Dry Media - Black 853-349 Airaid SynthaMax Dry Media - Blue
Synthamax Air Filters do not re-
quire oil. Service air filter as need-
ed by cleaning with common non-
petroleum all-purpose household
cleaner and water. Simple Green®,
Formula 409® or equivalent works
great. Apply cleaner to outside of
air filter and allow to soak. Then
flush filter clean from the inside out
with a garden hose and repeat steps
if necessary. Do not apply high
pressure water or air to clean filter.
Allow filter to air dry and reinstall.
Vue de la page 1
1 2

Commentaires sur ces manuels

Pas de commentaire