Airaid 510-163 Manuel d'utilisateur télécharger pdf

Installation Instructions

For Part Numbers:

510-163 700-458 Airaid Oiled Media Filter

511-163 701-458 SynthaMax Dry Media Filter - Red

512-163 702-458 SynthaMax Dry Media Filter - Black

513-163 703-458 SynthaMax Dry Media Filter - Blue

2000-04 Toyota Tundra

2001-04 Toyota Sequoia

4.7L V8

Component Identification

1. Airaid Premium Filter 1

2. MAF Panel 1

3. Back Panel 1

4. MAF Adapter 1

5. Modular Intake Tube 1

6. Reducer Coupler 1

7. Urethane Hump Hose 1

8. 1/2”x13” Breather Hose 1

9. 3/8” x 17” Hose 1

10. Weather Strip 26 3/4” 1

11. #52 Hose Clamp 2

12. #56 Hose Clamp 1

13. #60 Hose Clamp 1

14. 1/4” Barb x 1/8” NPT 1

15. 1/4” x 1/4” x 1/8” Vacuum Tee 1

16. 1/4” x 4” Hose 1

17. 6-32 x 5/16” Screw 3

18. #6 Flat Washer 3

19. 6-32 Keps Nut 3

20. 1/4 - 20 Button Head Bolt 3

21. 1/4” Flat Washer 3

22. 8-32 x 1/2” Button Head Bolt 2

23. 1/4” x 1/4” x 3/8” Tee 1

24. Speed Clamp 1

1. Stage I

Disconnect the negative battery cable!

A) Remove the two screws, and remove the

Mass Air Flow (MAF) sensor fr om the facto-

ry airbox. Leave the wiring harness connected,

and set it aside. B) Loosen the hose clamp on

the intake tube

2. Unlatch the 4 clips on the factory airbox, and

remove the lid. Remove the factory air filter.

3. Assemble the Airaid Cool Air Dam (CAD)

panels (#2, #3) using three 6-32 x 5/16” screws

(#17), #6 flat washers (#18), and 6-32 keps nuts

(#19). Install the MAF adapter (#4) using two

1/4 - 20 button head bolts (#20), and 1/4” flat

washers (#21), as shown.

4. Remove the fan shroud bolt from the passen-

ger side of the radiator. (Save for reuse).

5. Slide the MAF adapter into the factory tube,

and at the same time slip the CAD onto the top

of the factory airbox base, adjust for fit and re-

latch the 3 factory clips. Tighten the hose clamp

on the factory intake tube. Reinstall the shroud

bolt from step #4.

6. Remove the top screw on the CAD. Spread

the panels slightly, and slip the wiring harness

thru the gap into the access hole, as shown. Re-

install the screw and tighten.

7. Install the MAF sensor into the MAF adapter

(#4) and tighten down using two 8-32 x 1/2”

button head bolts (#22). Do Not Use The Facto-

ry Screws!

8. Install the Airaid Premium Filter (#1) onto the

MAF adapter . Next install the weather str ip

(#10) on top of the CAD. Start at the radiator

end and work you way towards the back.

9. Stage II

For maximum airflow and aggressive sound

from your vehicle, proceed with installing the

Airaid Modular Intake Tube (#5). The MIT can

be added or taken off of your vehicle at any time

depending on your preference. If you choose not

to install the MIT, skip to step #19 on the back

page.

This kit is only legal for sale in California for 2000 thru 2002 Toyota Tundras, and Sequoias.

2003 and 2004 Tundras, and Sequoias do not have C.A.R.B. exemption status.

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Résumé du contenu

Page 1 - Installation Instructions

Installation Instructions For Part Numbers: 510-163 700-458 Airaid Oiled Media Filter 511-163 701-458 SynthaMax Dry Media Filter - Red 512-163 702

Page 2 - REV.10.25.13

14. A) Install the 1/4”Barb x 1/8”NPT fitting (#14) into the Airaid Modular Intake Tube(MIT) (#5). B) Next, slip the 1/4”x 4” hose (#16) onto the 10

Modèles reliés 511-163 | 512-163 | 513-163 |

Commentaires sur ces manuels

Pas de commentaire

Airaid 510-163 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement aérien Airaid 510-163. Airaid 510-163 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés 511-163 | 512-163 | 513-163 |

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement aérien Airaid 510-163