Airaid 510-173 Manuel d'utilisateur télécharger pdf

Installation Instructions

For Part Numbers:

510-173 700-458 Airaid Oiled Media Filter

511-173 701-458 SynthaMax Dry Media Filter - Red

512-173 702-458 SynthaMax Dry Media Filter - Black

513-173 703-458 SynthaMax Dry Media Filter - Blue

2005-06 Toyota Tundra

2005-07 Toyota Sequoia

4.7L V8

Component Identification

1. Airaid Premium Filter 1

2. MAF Panel 1

3. Back Panel 1

4. MAF Adapter 1

5. MIT Intake Tube 1

6. 3 ½”to3 3/8”x2 Reducer 1

7. 3 ½”x3” Hump Hose 1

8. ½”x13” Hose 1

9. Weather Strip 22” 1

10. # 52 Hose Clamp 2

11. # 60 Hose Clamp 2

12. ¼”Barbx1/8”NPT 1

13. ¼”x1/4”x1/8” Vacuum Tee 1

14. ¼”IDx4” Hose 1

15. 6-32x5/16” Screw 3

16. #6 Flat Washer 3

17. 6-32 Keps Nut 3

18. ¼”x20 Button Head Bolt 3

19. ¼” Flat Washer 3

20. 8-32 Button Head Bolt 2

21. Hose Mount 1

1. Stage I

Disconnect negative battery cable.

Remove 2 screws and remove and set aside the

Mass Air Flow sensor from the factory airbox.

Unclip wire harness from intake tube.

(See arrow)

2. Loosen hose clamp where intake tube connects

to the airbox.

3. Unlatch 4 clips on factory airbox

4. Remove factory airbox lid, and filter. 5. Remove fan shroud bolt on passenger side of

radiator, save for later use.

6. Assemble Cool Air Dam (#2) & (#3) using

three screws (#15), washers (#16), and nuts

(#17). Install MAF adapter (#4) using two button

head bolts (#18), and washers (#19), as shown.

7. Slip MAF adapter into factory intake tube

while installing CAD onto top of factory airbox.

Adjust for fit, and latch 3 factory clips on facto-

ry airbox. Tighten the hose clamp on the intake

tube. Replace the fan shroud bolt that was re-

moved in step #5.

8. Re-route MAF wire harness under the intake tube,

and around the front of the airbox. Install MAF sen-

sor into the MAF adapter , using two supplied button

head screws (#20). DO NOT USE FACTORY

SCREWS!

9. Slip hose mount (#21) over MAF wire harness,

and into hole in bottom of CAD. This will keep

the harness from chafing.

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Résumé du contenu

Page 1 - Component Identification

Installation Instructions For Part Numbers: 510-173 700-458 Airaid Oiled Media Filter 511-173 701-458 SynthaMax Dry Media Filter - Red 512-173

Page 2 - REV.01.06.14

10. Install the Airaid Premium Filter (#1) on the MAF adapter. Next install the weather strip (#9) on the CAD as shown. Start at the front, next to th

Modèles reliés 511-173 | 512-173 | 513-173 |

Commentaires sur ces manuels

Pas de commentaire

Airaid 510-173 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement aérien Airaid 510-173. Airaid 510-173 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés 511-173 | 512-173 | 513-173 |

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement aérien Airaid 510-173