Airaid 400-299 Manuel d'utilisateur télécharger pdf

Installation Instructions

For Part Numbers:

400-299 720-478 Airaid Oiled Media Filter

401-299 721-478 SynthaMax Dry Media Filter - Red

402-299 722-478 SynthaMax Dry Media Filter - Black

403-299 723-478 SynthaMax Dry Media Filter - Blue

2011-14 Ford F-150 5.0L V8

1. Disconnect the negative battery cable!

A. Disconnect the two breather lines in the factory in-

take tube .

B. Loosen the two intake clamps, and remove the facto-

ry intake tube.

3. Remove the factory air filter from the lower half of

the airbox.

4. Assemble the two Quick Fit Panels (#4 & #5) as

shown using four 6-32 screws (#12), flat washers

(#13), and Kep Nuts (#14). The panel tabs are to be on

the outside of the assembly.

5. Install the Air Meter Tube (#2) onto the Panel As-

sembly and secure using the two 1/4-20 Button Head

Bolts (9), and 1/4” Flat Washers (#10).

6. Transfer the MAF sensor into the Airaid Intake Tube

and secure using two 8-32 x 1/2” button head screws

(#10). Do Not Use The Factory Torx Head Screws.

7. Install the assembly onto the lower half of the facto-

ry airbox. Slide the metal tabs into the airbox slots, and

fasten the 3 airbox clips

8. A.) Insert the 5/8” Grommet (#18) into the Intake

tube as shown. Complete the tube assembly by insert-

ing the 5/8 PCV Fitting (#16) into the Grommet.

B.) Install the 3/8 “ Hose Fitting (#20) into the thread-

ed holt in the Intake Tube.

2. A.) Disconnect the Mass Air Flow (MAF) Sensor.

B.) Unfasten the three clips on the left side of the facto-

ry airbox, and remove the upper half of the factory air-

box.

9. Install the Silicone Reducer (#7) and Hose clamps

onto the Airaid Intake Tube (#2). Place the #56 clamp

(#15) on the Throttle body side of the reducer, and the

#64 clamp (#17) on to the tube side.

Note: Tab is outside

Component Identification

1. Airaid Premium Filter 1

2. Air Meter Tube 1

3. Airaid Intake Tube 1

4. Front Panel 1

5. Rear Panel 1

6. Hump Hose 1

7. Silicone Reducer 1

8. 22” Weather strip 1

9. ¼-20 x ½” Button Head Bolt 2

10. 1/4” Flat Washer 2

11. #8-32 x ½”Button Head Screw 2

12. #6-32 x 5/16 Pan Head Screw 4

13. #6 Flat Washer 4

14. #6-32Kep Nut 4

15. #56 Hose Clamp 1

16. #60 Hose Clamp 2

17. #64 Hose Clamp 1

18. Grommet 1

19. PCV Fitting 1

20. ¼ NPT to 3/8” Hose Fitting 1

21. T-20 Torx Bit 1

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Résumé du contenu

Page 1 - Installation Instructions

Installation Instructions For Part Numbers: 400-299 720-478 Airaid Oiled Media Filter 401-299 721-478 SynthaMax Dry Media Filter - Red 402-299 722

Page 2 - Tune-Up Kit!

Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com REV.04.01.14 P/N 790-551 Aerosol Spr

Modèles reliés 401-299 | 402-299 | 403-299 |

Commentaires sur ces manuels

Pas de commentaire

Airaid 400-299 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement aérien Airaid 400-299. Airaid 400-299 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés 401-299 | 402-299 | 403-299 |

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement aérien Airaid 400-299