Airaid 860-425 Manuel d'utilisateur télécharger pdf

Part List

1 Airaid Premium Filter 1

2 8-32 x .38L BHCS 2

3 #8 Flat Washer 2

4 #8 Kep Nut 2

Installation Instructions

Part Numbers :

860-425, 861-425 & 863-425

2011-2014 Jeep Wrangler 3.6L

3. Disconnect the crankcase breather line in the top of the

airbox. Remove the entire airbox as an assembly by un-

seating it from the mounting grommets in the inner fend-

er and lifting upward.

4. Drill out the rivet heads on the factory airbox and re-

move the air scoop. Remove any remaining rivet pieces

from the air box and discard them.

Disconnect The Negative Battery Terminal!

1. Remove the engine cover and set it aside.

2. A.) Disconnect the air temp sensor in the factory

intake. B.) Remove the two 6 mm bolts holding the

intake tube to the fan Shroud. C.) Loosen the Clamps

on both sides of the factory intake tube. D.) Unclip the

coolant line from the intake tube and remove it from the

vehicle.

NOTE: Installation of this air filter requires modifica-

tion of the OEM airbox. Please read the installation

instructions in their entirety before beginning the pro-

cess.

1 2

Part List 1 Airaid Premium Filter 1 2 8-32 x .38L BHCS 2 3 #8 Flat Washer 2 4 #8 Kep Nut 2 Installation Instructions Part Numbers

Page 2

7. Re insert the modified air scoop into the air box and secure it using the # 8 Screws, Washers, and Nuts. 5. Set the factory air scoop on a workbe

Pas de commentaire

Airaid 860-425 Manuel d'utilisateur