Airaid 200-719 Manuel d'utilisateur télécharger pdf

Installation Instructions

Part Number: 200-919 MIT OR

Part Number: 200-719 Jr. Kit

2005-06 GM Full Size Trucks & SUVs

2007 “Classic” Full Size Trucks

W/4.8L,5.3L,6.0L Engines W/ Electric

Cooling Fans

Packing List:

*850-135 Airaid Premium Filter 1

#2 KIT919T Modular Intake Tube 1

#3 KITHUMPS02 Urethane Hump Hose 1

#4 KITCOUPLER10 Urethane Coupler 1

KIT919HP Hardware & Instructions 1

#5 KITHS60 #60 Hose Clamp 2

#6 KITHS64 #64 Hose Clamp 2

* Filter included only in 200-719 kit

Tools Required For Installation:

5/16” Socket

Ratchet & Extension

Flat Screwdriver

#25 Torx Bit

1. Disconnect negative battery cable.

With a 5/16” socket, remove one bolt on the top of the

beauty cover. Set the bolt and the cover aside for re-

installation later.

2. Loosen the hose clamps on both ends of the factory in-

take tube.

3. With a screwdriver, pry the factory tube away from the

plastic tab on the radiator hose clamp, and remove the tube.

4. Install the hump hose (#3) and two #60 hose clamps (#5)

on the Mass Air Flow sensor as shown. Leave the clamps

loose for now.

1 2

Page 1

Installation Instructions Part Number: 200-919 MIT OR Part Number: 200-719 Jr. Kit 2005-06 GM Full Size Trucks & SUVs 2007 “Classic” Full Si

10. Double check your work! Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, and screws are tight. 11.

Modèles reliés 200-919

Pas de commentaire