Airaid 250-218 Manuel d'utilisateur Page 1
Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement aérien Airaid 250-218. Airaid 250-218 User Manual Manuel d'utilisatio
- Page / 2
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Installation Instructions
For Part Numbers:
250-218 720-475 Airaid Oiled Media Filter
251-218 721-475 SynthaMax Dry Media Filter - Red
252-218 722-475 SynthaMax Dry Media Filter - Black
253-218 723-475 SynthaMax Dry Media Filter - Blue
2005-07 Chevrolet Corvette C6
6.0L V8
Component Identification
1. Airaid Premium Filter 1
2. Airaid Intake Tube 1
3. Urethane Hump Hose 1
4. Coupler 1
5. Drivers Side Air Dam 1
6. Passenger Side Air Dam 1
7. Weather Strip 10 1/2” 2
8. 8-32 x 3/8” Button Head Screw 2
9. M4 Pan Head Screw 2
10. #8 Flat Washer 4
11. M4 Clip Nut 2
12. Small Rubber Washer 4
13. #60 Hose Clamp 3
14. #64 Hose Clamp 1
1. Disconnect negative battery cable.
Push the tab on the factory breather hose and discon-
nect it from the fitting in the factory coupler. Loosen
the three hose clamps on the factory intake tube.
2. Lift the factory intake tube up and remove the
Mass Air Flow (MAF) sensor fr om the coupler and
slide it out of the way. Next remove the coupler from
the throttlebody, and then remove the factory intake
tube and filters from the vehicle as an assembly.
5. Remove the two factory grommets from the facto-
ry intake tube. They will be reused in step #6.
3. Remove the barbed fitting from the factory cou-
pler. It will be reused in step #4.
4. Reinstall the barbed fitting removed in step #3 into
the Airaid hump hose (#3) as shown. Install one #64
hose clamp (#14) onto the back of the hump hose,
and one #60 hose clamp on the front.
6. Install the factory grommets removed in step #5
into the Airaid intake tube (#2).
7. Attach the two air dams (#s 5&6) to the Airaid
intake tube as shown using two 8-32 x 3/8” screws
(#8), and two #8 flat washers (#10). Leave the screws
slightly loose for adjustment later. Refer to the line
drawing at the top of this page for reference.
Next install the supplied coupler (#4) onto the Airaid
intake tube as shown using two #60 hose clamps
(#13). Tighten only the clamp on the tube.
8. Install the Airaid Premium Filter into the area in
front of the radiator. It will be attached to the Airaid
intake tube in step #11.
9. Install the hump hose with the #64 hose clamp on
the throttlebody. Adjust it so that the breather hose
aligns with the barbed fitting, and reconnect the
breather. Tighten the hose clamp on the throttlebody.
Reinstall the MAF sensor into the hump hose making
sure the “Flow” arrow is pointing towards the engine.
Tighten the remaining hose clamp.
Factory Tube
Coupler
MAF
#60 Hose Clamp
#64 Hose Clamp
Hump Hose
MAF Sensor
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.
1
2
Résumé du contenu
Page 1 - Installation Instructions
Installation Instructions For Part Numbers: 250-218 720-475 Airaid Oiled Media Filter 251-218 721-475 SynthaMax Dry Media Filter - Red 252-2
Page 2 - Tune-Up Kit!
12. Double check your work! Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, bolts, and screws are tight. 13.
Produits connexes et manuels pour Équipement aérien Airaid 250-218
(2 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.454 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels