Airaid 400-519 Manuel d'utilisateur télécharger pdf

# 400-519 INSTALLATION INSTRUCTIONS

94-98 Ford Mustang 3.8L V6

Parts List

(1) Power Plate

(2) Gaskets

(4) 8mm x 50mm Bolts

(4) 8mm Washers

(2) 5/16-18” Linkage Plates

(2) 8mm x 16mm Flat Head Screws

(2) 5/16-18” x 5/8” Bolts

(2) 5/16” Flat Washers

Tools List

13mm Socket

5mm Hex Key

Standard Screwdriver

Thank you for purchasing the PowerAid Throttle Body Spacer. Please read the

instruction manual carefully before proceeding with the installation. Contact AIRAID @

(800) 498-6951 8:00 AM - 5:00 PM MST Weekdays for questions regarding fit or in-

structions that are not clear to you. Your PowerAid Throttle Body Spacer was carefully

inspected and packaged. Check that no parts are missing, or were damaged during

shipping. If any parts are missing, please contact AIRAID.

Thank you for selecting AIRAID.

Included with your Poweraid Spacer is a sticker with a California Air Resources Board

(C.A.R.B.) Executive Order (EO) number. This sticker must be placed in plain view inside of

the engine compartment. Failure to do so may prevent you from passing a smog inspection.

1 2

1 # 400-519 INSTALLATION INSTRUCTIONS 94-98 Ford Mustang 3.8L V6 Parts List (1) Power Plate (2) Gaskets (4) 8mm x 50mm Bolts (4) 8mm Washers (2) 5/16

Page 2

2 Installation Instructions. Read Me! 1. DISCONNECT NEGATIVE (-) BATTERY CABLE. 2. Remove air cleaner housing from the throttle body. 3. Remove (3)

Pas de commentaire

Airaid 400-519 Manuel d'utilisateur