Airaid 450-328 Manuel d'utilisateur
Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement aérien Airaid 450-328. Airaid 450-328 User Manual Manuel d'utilisatio
- Page / 2
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Installation Instructions
For Part Numbers:
450-328 700-495 Airaid Oiled Media Filter
451-328 701-495 SynthaMax Dry Media Filter - Red
452-328 702-495 SynthaMax Dry Media Filter - Black
453-328 703-495 SynthaMax Dry Media Filter - Blue
2015 Ford Mustang
5.0L GT V8
2. Remove the strut tower brace is so equipped. Lift up
on the engine cover to unseat it from it’s mounting
grommets and set it aside.
3. Disconnect the 3 breather lines and resonator tube from
the intake tube. Loosen the hose clamps and remove the
factory intake tube.
4. Gently pry the harness anchor out of the airbox and
disconnect the mass air flow meter.
5. Remove the 6mm airbox mounting bolt in the inner
fender and lift the entire airbox assembly out of the
vehicle. Set the bolt aside for now. It is to be reused.
6. Be sure the speed clip and the airbox grommet remain
inside the vehicle. They will be reused.
9. Slide the Hump Hose and Clamps onto the Filter
Adapter as shown. Do not tighten the clamps at this time.
7. Install the Filter Adapter onto the Cold Air Box as
shown, using the three 1/4-20 Button Head Screws and
1/4” Flat Washers
8. Place the Airaid Airbox assembly into the engine
compartment as shown, with the locator pin on the bot-
tom of the box inside the fender grommet. Secure the
Airbox by reusing the 6mm bolt removed in step # 5.
Component Identification
1 Airaid Premium Filter 1
2 Cold Air Box 1
3 Airaid Intake Tube 1
4 Reducing Coupler 1
5 Hump Hose 1
6 Filter Adapter 1
7 Air Box Lid 1
8 Air Box Window 1
9 1" Hose 1
Hardware and Instructions 1
10 ¼" Flat Washer 9
11 ¼"-20 x ½" Button Head Screw 9
12 Button Head Screw 2
13 Aluminum Fitting 2
14 5/8 Aluminum Fitting 1
15 1/2" Grommet 2
16 3/16" Grommet 1
17 Resonator Cap, (Not Shown) 1
18 #56 Hose Clamp 1
19 #64 Hose Clamp 1
20 #68 Hose Clamp 2
21 Speed Clamp 2
22 Firewall Plug, (Not Shown) 1
1. Remove the battery box cover in the cowl and discon-
nect the negative battery terminal.
Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.
Bolt
Pin
FILTER IDENTIFICATION
700-495 Airaid Oiled Media 701-495 Airaid SynthaMax Dry Media - Red
702-495 Airaid SynthaMax Dry Media - Black 703-495 Airaid SynthaMax Dry Media - Blue
1
2
3
Resonator
Anchor
MAF
1
2
Résumé du contenu
Page 1 - FILTER IDENTIFICATION
Installation Instructions For Part Numbers: 450-328 700-495 Airaid Oiled Media Filter 451-328 701-495 SynthaMax Dry Media Filter - Red 452-328
Page 2
Airaid Filter Co. 2688 E Rose Garden Ln. Phoenix AZ 85050 (800) 498-6951 [email protected] www.airaid.com Thank you for purchasing the Airaid
Produits connexes et manuels pour Équipement aérien Airaid 450-328
(2 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.508 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels