Airaid 300-190 Manuel d'utilisateur télécharger pdf

Installation Instructions

For Part Numbers:

300-190 700-445 Airaid Oiled Media Filter

301-190 701-445 SynthaMax Dry Media Filter - Red

302-190 702-445 SynthaMax Dry Media Filter - Black

303-190 703-445 SynthaMax Dry Media Filter - Blue

2006-08 Dodge Ram 1500/2500/3500

5.7L V8

2. Unlatch 4 clips on the factory airbox lid and

remove the lid and intake hose assembly. Re-

3. Squeeze the tab on the connector, and dis-

connect the intake temperature sensor.

4. Using a 10mm socket, remove two bolts

holding the intake resonator to the intake mani-

fold. Lift and pull the resonator away from the

5. Remove the factory seal from the throttle

body.

6. Gently twist the air temperature sensor

counterclockwise and remove it from the

7. Install the supplied grommet (#12) into the

Modular Intake Tube (#3). Next, carefully slide

the factory temperature sensor into the grom-

met until it touches the tab on the temperature

8. Install the Quick Fit Panel (#2) onto the factory

airbox base by sliding the tabs on the base thru

the Quick Fit Panel and then adjust the sides to

fit. Re-latch the 4 clips to hold the Quick Fit

9. Install the urethane hump hose (#4) onto

the tube on the Quick Fit Panel using two

Component Identification

1. Airaid Premium Filter 1

2. Quick Fit Panel 1

3. Modular Intake Tube 1

4. Urethane Hump Hose 1

5. Reducing Coupler 1

6. Weather Strip 32 3/4” 1

7. Black Rubber Cap 1

8. #52 Hose Clamp 2

9. #60 Hose Clamp 2

10. #14 Speed Clamp 1

11. #24 Speed Clamp 1

12. Rubber Grommet 1

10. Install the reducing coupler (#5), small

end first, onto the throttle body using two #52

hose clamps (#8). Leave the clamps loose for

now.

11. Install the Modular Intake Tube (#3) into

the hump hose first and then into the reducing

coupler. Adjust for fit, and then tighten all 4

hose clamps.

12. Install the provided rubber cap (#7)

and speed clamp (#10) onto the nipple on

the Modular Intake Tube, as shown.

1. Disconnect the negative battery cable!

Loosen the hose clamp on the resonator. Dis-

Full color instructions can be viewed on our web site at Airaid.com. Use the Product Search function to find your part number, and click View Details.

1 2

Résumé du contenu

Page 1 - Installation Instructions

Installation Instructions For Part Numbers: 300-190 700-445 Airaid Oiled Media Filter 301-190 701-445 SynthaMax Dry Media Filter - Red 302-190 702

Page 2 - Filter Tune-Up Kit!

16. Double check your work! Make sure there is no foreign material in the intake path. Make sure all clamps, hoses, fasteners, and wiring connections

Modèles reliés 301-190 | 302-190 | 303-190 |

Commentaires sur ces manuels

Pas de commentaire

Airaid 300-190 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement aérien Airaid 300-190. Airaid 300-190 User Manual Manuel d'utilisatio

Résumé du contenu

Modèles reliés 301-190 | 302-190 | 303-190 |

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement aérien Airaid 300-190